Xtreme PC Central Tech Forums  

Go Back   Xtreme PC Central Tech Forums > Technical Topics > General Technical Support & Discussion

General Technical Support & Discussion General tech support, discussion & troubleshooting here.

Reply
 
Thread Tools Display Modes
Old 01-13-2002, 4:07 PM   #1
sys-eng
Registered User
 
Join Date: Oct 2001
Posts: 46
iTrader: (0)
need HELp with video crashing system

01-13-2002

A recently installed NASCAR 4 game has been locking up my system after about twenty minutes of play. In an effort to fix this, I updated with the win2k6011 driver then rebooted. I made a few changes to my Radeon 32 DDR with UniTuner based upon a tweaking article found at http://www.rage3d.com/radeon/reg/index.shtml and rebooted. I can run NASCAR 4 at 800x600 16 bit with all effects set a minimum which is very unrealistic and boring. 3DMark 2001 causes the system to automatically reboot after the first demo test completes. The system log has the following error message recorded:

“The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xc0000005, 0xb78a2b71, 0x00000000, 0x00000008). Microsoft Windows 2000 [v15.2195]. A dump was saved in: C:\WINNT\Minidump\Mini011302-01.dmp.”

Determining that the previous operation was better than the present, I decided to try to get back to the initial setup. The instructions for the latest ATI driver says to uninstall current driver with the add/remove programs utility before loading the new driver. The utility will not remove the Omega driver because it is not “certified”. I tried loading the ATI driver anyway; however, a look into the registry has the following text which seems to indicate that Omega driver is still installed.

HKEY_LOCAL_MACHINE
SOFTWARE
ATI TECHNOLOGIES
CDS
0000
0
Driver
ATI Radeon 7200 (Omega 2k 1.0.86) (0x00000000)
System\CurrentControlSet\Control\Class\{4D36E968-E325-11CE-BFC1-08002BE10318}\0000 (0x00000000)
ati2dvag.dll (0x00000000)
SYSTEM\CURRENTCONTROLSET\ENUM\PCI\VEN_1002&DEV_514 4&SUBSYS_00BA1002&REV_00\4&618BA55&0&0008 (0x00000000)
C:\WINNT\Inf\oem0.inf (0x00000000)
ati2mtag_default (0x00000000)
ATI Technologies Inc. (Opt. by Omegadrive) (0x00000000)
D700-0110092300 (0x00000000)

I need help.
How can I remove the Omega driver?
How do I get back to stock video settings without a reformat and system rebuild?
What is the bugcheck error that is crashing the system?

sys-eng

system configuration
Motherboard = Soyo SY-K7V Dragon
CPU = Athlon 1.4GHz (stepping)
RAM = 2x256 MB Corsair 2400, CAS 2.0
Video = Radeon LE 32 MB
Audio = on-board motherboard
OS = Windows 2000 Professional Version 5 (Build 2195 Service Pack 2)
Magnetic Disk Drives = 2 x IBM 60 GXP 60 GB configured in RAID 1
DVD / CDROM = Toshiba SD-M1502
CD W/RW = Plextor PX-W1610A
Keyboard = Logitech Internet Navigator
Pointer = Microsoft TrackBall Explorer
Game Controllers = Microsoft SideWinder Force Feedback Wheel (USB)
Monitor = NEC MultiSync 6FGp (21”)


Last edited by sys-eng; 01-13-2002 at 7:12 PM.
sys-eng is offline   Reply With Quote
Old 01-14-2002, 3:09 PM   #2
BFlurie
Registered User
 
Join Date: Oct 2001
Location: Maryland, USA
Posts: 12
iTrader: (0)
For just a quick reply, you may have to go into the registry w/Regedit32, drill down to the lowest level keys you wish to delete, click "permissions", and add "administrator" for full control. Only then can you delete certain \enum keys. However, you must be certain of what you're doing. Also, the indicated .inf file needs to be copied somewhere else for backup, then deleted in the .inf folder. Be very, very careful deleting video devices as this might prevent you from booting.
BFlurie is offline   Reply With Quote
Old 01-14-2002, 4:13 PM   #3
sys-eng
Registered User
 
Join Date: Oct 2001
Posts: 46
iTrader: (0)
any other suggestions

Quote:
you must be certain of what you're doing
Well, I am not certain so that is why I am seeking help. I do not know what to delete without causing catastrophic harm.

I really messed up when I violated my policy of not loading anything that did not have a uninstall feature.

Thanks for the reply.

sys-eng
sys-eng is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 8:38 AM.


Powered by vBulletin
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Copyright © 2001-2009 by Xtreme PC Central.com All rights reserved.