Lt.Col.Claymore
11-01-2003, 12:57 PM
Zalman ZM-OP1 Blowhole
Making a BlowHole from ZM-OP1 Fan's
(for this mod i used a Cooler Master PAC-T01)
6x - 80mm Fan - Zalman Slim Fan ZM-OP1
- Blowhole
use two ZM-OP1 as Blow hole's ( ) ( ) <-- Like this
- Back Side Cpu Cooling :confused:
Take one ZM-OP1 Fan and Look for the Back Side of the CPU
Location put itn the Rigth Panel of you case the Fan ther Directly over the Cpu Back
- PSU Extra Cooling !
for the ones that sill have one Cooling in there but
dont whant to Buy one from over 108 Dollar
i have done this to mines placed a ZM-OP1 Fan Directly at
the Back of the PSu located inside the case
(can be better to place one at the top)
Best Regard Osama Bin Bert :D
(Must Know you do this at your own Risk i wil not Be Responseble for any dammage)
Making a BlowHole from ZM-OP1 Fan's
(for this mod i used a Cooler Master PAC-T01)
6x - 80mm Fan - Zalman Slim Fan ZM-OP1
- Blowhole
use two ZM-OP1 as Blow hole's ( ) ( ) <-- Like this
- Back Side Cpu Cooling :confused:
Take one ZM-OP1 Fan and Look for the Back Side of the CPU
Location put itn the Rigth Panel of you case the Fan ther Directly over the Cpu Back
- PSU Extra Cooling !
for the ones that sill have one Cooling in there but
dont whant to Buy one from over 108 Dollar
i have done this to mines placed a ZM-OP1 Fan Directly at
the Back of the PSu located inside the case
(can be better to place one at the top)
Best Regard Osama Bin Bert :D
(Must Know you do this at your own Risk i wil not Be Responseble for any dammage)