What's in yours?

[Mntsnow]

Whats in your network? (Testing of attachments)

[NDC]

I don't need to post an image to explain my network! I can just tell you... I only have 3 systems on my home network. ABIT VP6, ABIT BE6-2 & ABIT KT7A on a Linksys BEFSR41 router.... :D

[edwelly]

OK... Here is mine (This is what it will look like in less than 2 weeks)...
Mntsnow, what app did you use to draw out your network?

[edwelly]

Any advice on the above picture would be highly appreciated...
"It can always be better"...

[RampageIII]

Motorola cable modem

Netgear Rt 311 router

Netgear 5 port switch

P!!! 800 Homemade

P200 Dell

AMD 450 Generic



:)

[Mntsnow]

Edwelly

The application I used for that drawing is Visio 2000 I use if for work all the time


as for what to change in your network....Really not much unless you plan on really getting into the webserving and such

[jadison]

Currently I own two computers,

one:
1.2GHz Athlon
392MB Ram
40GB HD

two:
486DX2 66MHz
16MB RAM
220MB HD

I have broadband...I'm thinking of upgrading the second, and networking the two...for sharing and internet access.

Need atleast $300 for the upgrade...will build soon!

-=jd=-

[eweruk]

At home? Sad but true, cross over cable. :o

At work? Man, that would be a very large Visio diagram.

[hawkeye177]

3 Computers hooked up by a 10baseT hub. Soon to be replaced.
Printer is on a compter and one internet provider using 56K

[NDC]

Boy! You guys have a SOHO there! ;)

As I've said above, I only have three computers now. But this is only because I don't want to end up lugging these systems when I have to go back to the United States. I shall build myself a nice little network setup as soon as I get back to the states! Then I can post some diagrams like you guys, edwelly & Mntsnow! ;)

[madfish]

P-II 450
P-II 700 E Celeron
P-I 233mmx
going to a smc router 4 port with Print sever/HP 842c deskjet as the printer.
Netgear 4 port hub up linked to the smc router
it has these on the hub
P-200mmx
DX4/100
DX2/66.
The smc router is hooked to the adsl..
I have my P-I 133 lap top with docking station I put on when I need to, I just unplug the 233's cable.
I need another hub or a bigger router
Madfish

[Ritalin Kid]

Dang!.. so far just my 1.5 TBird and my roomate's 750 Duron on a Linksys 10BaseT Hub... still waitin on me router..

[nbk13nw]

4 systems - TBird 1.4 / 1.2, PIII 300 / IBM T21 PIII-800

Linksys 5 port switch
Linksys Router
Intel 10/100 NIC X 3
Intel 10/100 PCMCIA

[jadison]

Any more network setups?

I'm still waiting on another machine...my network won't be setup for atleast another few months. :(

[lynchmob]

I am working on a Linux net'.Have 3 comps as follows:
P2 400
256MB
SuSE 7.1
Intel 440BX board

P3 667
256MB
MDK 8.1
Asus p3v4x

P3 600
256MB
SuSE 7.3
Epox 6vba2
Just started on this one.Havent done much more than setup basic connectivity.Will di the NIS,NFS stuff soon.
Almost forgot to mention:all hooked together with Linksys 4-port hub and LNE100x nics.
lynch

[Praetorian]

My lan should be exactly like this within the month.

OpenBSD firewall in front of Linksys 4 port router.

On router
AMD T-Bird @ 1.33ghz (Red Hat Linux workstation)
Intel Pentium @ 233mhz (Win98SE workstation)
Intel Pentium @ 166mhz (Win95 workstation)

On Netgear hub(uplinked off router)
AMD K6-2 @ 450mhz (FreeBSD server)
Intel Celeron @ 466mhz (Win98SE workstation & BeOS workstation)

[hirschY]

Newly installed Linksys 4 port router, with the UT server in the DMZ (a K6-2-500)
Behind the firewall is my Duron 700, kids 1.4 C, and the K6-2-333, on a hub so I can connect the work lappy.
All runing ECCp, and the 333 running D2OL.
I havent created a drwaing, but might sometime....
I have about 10 actual network drops in the house, hehe.
Two spare in the bedroon, and three in the living room

[jadison]

Glad to see you running D2OL, hirschY.
I've finally been able to resolve the conflict I had with not being able to connect to their servers. It turns out that I had to wait for my ISP (Road Runner) to provide me w/a new DNS. With that new DNS, I'm now able to connect just fine and I've been crunching ever since! :)
Nice setup BTW ;)

[gmgq]

Mntsnow, why do you have seperate routers/firewalls for each system? Why not make use of the built-in 4-port switch??

Very interesting, and just curious... Thanks.

[surrealchereal]

OK yippie we can look and ask questions.. :D

(hee hee Mntsnow is gonna wish he could change his ip and not tell me so I can't find the board again before my network is set up right;) )

Ohhhh You have several IP's assigned on each computer, right?