BSOD when overclocking

[yaputzis]

Hi everyone and Merry Xstmas.

My system config:

ATX Midi Tower 300w PSU (FEEL) with 3 case fans
MSI K7T266 ProR (MS-6380) bios 1.70
Athlon T-bird 1.4ghz@1.533ghz (Arqua Thermoengine Turbo)
512mb DDR PC2100
Western Digital 30gb 7.200 ATA100
Hercules 3D Prophet 4500 64mb
SoundBlaster Live! 1024 player
Haupaugge Firewire IEEE 1394
Zoom V92 PCI Faxmodem
Asus CDS-500
Yamaha CRW8424E
HP Deskjet 690C
Acerscan Prisa 320P
Philips 150B TFT monitor
Microsoft Intellimouse PS2
Logitech PS2 keyboard
1,44 floppy drive
Win98se + Win2k SP2 dual boot

I have set my Athlon T-bird at 11.5x133 vcore 1.85. Everytime I try to run the BurInTest or the Sisoft Sandra burnin wizard I get the following BSOD:

*** STOP: 0X000000D1 (0X00000023, 0X00000002, 0X00000000, 0X00000023)
DRIVER_IRQL_NOT_LESS_OR_EQUAL

And I have to restart my system.

Is there a way to solve this? I know that it runs stable at 11x136 vcore auto.

Thanks in advance,

Antonis

[jadison]

As I don't have the same configuration, I can't completely relate...but I've used Sandra with several OC'ed machines and with several different versions of Sandra. What version of Sandra do you have?
Try upgrading to the latest version.

Also, I would check this link, as it may answer your question about the blue screen Click Here (http://www.techimo.com/forum/showthread.php?s=&threadid=8171) ...MSFT support sites provide an area where you can state the error message, and it will usually help you fix it.

Have you d/l all updates/patches for ur Win98 OS?

Also, the BurnIn Wizard may put too much stress on the system, therefore the Overclock may be set too high (although that shouldn't be the problem, I've seen higher OC's).

What are your temps for the CPU/Mobo.?