Memory Question

[Roadkill]

I have an FIC PA2006 mobo that takes 2 - 64 MB sticks of 168 pin PC66 SDRAM.

My question is; if I install PC100 or PC133 memory, will the higher speed SDRAM run at the lower speed of PC66, or will it not run at all?

Thanks

[Mntsnow]

Yes the memory is backwards compatable. As long as the memory is in the configuration that your motherboard will accept then most likely it will run

[Axel]

lets put it this way - in theory it should be backwards compatible - but for the best stable system - you want matched RAM in almost every case - preferably the same manufacturer and compare the chips to see if even that is the same..... part numbers mean nothing, or very little.....

like I said - in theory - there should be no problem......