AMD K6-2 Question

[Roadkill]

The AMD K6-2/350AFR runs at 2.2 volt core and 3.3 volt I/O.

What would happen if I run it at 2.8 / 2.9 volt core and 3.3 volt I/O ?

The reason I ask is I have an old FIC PA-2006 mobo and the lowest core voltage shown in the manual is 2.8 / 2.9 core volt.

[Mntsnow]

2.8 is pushing it by quite a bit. back when I used to overclock k6-2's I used to push them at about 20% over stock voltage as long as I kept a good heatsink on them. Most people only recommended no more than 10-15% over-voltage.