Omardeth
02-06-2004, 4:14 AM
this is a system i put together . would like to sell it as is and not part it out . pm or email (omar@xcelonline.com) me for photos . here is my Heatware (http://www.heatware.com/eval.php4?id=17396) . asking price is 600$ you pay shipping
p4 2.4 533fsb cpu
512 pc3200 (1 x 512 )
13.5 gb maxtor hd
4x dvd + r/rw drive
No OS
Mother Board Specification
CPU
Socket 478 processors:
Support Intel Celeron Pentium 4 Northwood processor
FSB 400/533 MHz frequencies supported
Chipset
North Bridget
Intel 845GE (Brookdale GE)
South Bridget:
ICH4
with USB 2.0 controller
Memory
Support DDR 200/266/333 SDRAM, up to 2GB
Two 184-pin DIMM sockets
VGA
Integrated Graphics controller in 845GE GMCH
Support 3D/2D enhancements
Support extend AGP 4X slot
Audio
AC-Link with AC”97 2.2 compliant
Realtek ALC650, 6 channel AC”97 codec
SPDIF input/output supported
USB Integrated USB 2.0 controller in ICH4
Ethernet
Realtek RTL 8100B 10/100 Base-T Ethernet controller
Full-Duplex supported, WFM 2.0 compliant
1394
Agera FW323-05 1394a host controller
Data transfer rate 100/200/400Mbps supported
Super I/O
Winbond W83627HF LPC controller
Two enhanced PCI IDE channels which support up to 4 IDE devices with ATA -100 transfer up to
100M/sec
BIOS
Award BIOS with 2MB EEPROM
ACPI/PnP support
Expansion Slots
PCI slot X1, AGP 4X slot X1
Drive Bays
Exposed:
- One 5.25” Standard Optical Drive
- One 3.5” Standard FDD Drive
Hidden:
- One 3.5” Standard HDD Drive
Front Panel I/O
- USB2.0 X2
- 1394( 6 Pin) X1
- SPDIF-In X1
- Center/Bass X1, Rear-Out X1, Line-Out X1, MIC X1
Back Panel I/O
- USB 2.0 X2
- LAN port ( RJ-45) X1
- SPDIF-Out X1
- 1394 ( 6 Pin) X2
- Serial port X1
- VGA port X1
- PS/2 keyboard X1
- PS/2 mouse X1
- Headphone X1, Line-in X1, MIC-in X1
Dimension
212 mm (W) X 306mm(D) X 242mm( H)
Chassis material
All Aluminum Chassis
ADD DVI card
(Optional) included .
Chrontel CH7010 DVI transmitter with TV encoder
TV –out supporting up to 1024X768 graphics resolutions
S-video out X1, Composite X1, DVI port X1
Power Supply
220W with UL, TUV, CE requirement
PFC optional
email (omar@xcelonline.com)
p4 2.4 533fsb cpu
512 pc3200 (1 x 512 )
13.5 gb maxtor hd
4x dvd + r/rw drive
No OS
Mother Board Specification
CPU
Socket 478 processors:
Support Intel Celeron Pentium 4 Northwood processor
FSB 400/533 MHz frequencies supported
Chipset
North Bridget
Intel 845GE (Brookdale GE)
South Bridget:
ICH4
with USB 2.0 controller
Memory
Support DDR 200/266/333 SDRAM, up to 2GB
Two 184-pin DIMM sockets
VGA
Integrated Graphics controller in 845GE GMCH
Support 3D/2D enhancements
Support extend AGP 4X slot
Audio
AC-Link with AC”97 2.2 compliant
Realtek ALC650, 6 channel AC”97 codec
SPDIF input/output supported
USB Integrated USB 2.0 controller in ICH4
Ethernet
Realtek RTL 8100B 10/100 Base-T Ethernet controller
Full-Duplex supported, WFM 2.0 compliant
1394
Agera FW323-05 1394a host controller
Data transfer rate 100/200/400Mbps supported
Super I/O
Winbond W83627HF LPC controller
Two enhanced PCI IDE channels which support up to 4 IDE devices with ATA -100 transfer up to
100M/sec
BIOS
Award BIOS with 2MB EEPROM
ACPI/PnP support
Expansion Slots
PCI slot X1, AGP 4X slot X1
Drive Bays
Exposed:
- One 5.25” Standard Optical Drive
- One 3.5” Standard FDD Drive
Hidden:
- One 3.5” Standard HDD Drive
Front Panel I/O
- USB2.0 X2
- 1394( 6 Pin) X1
- SPDIF-In X1
- Center/Bass X1, Rear-Out X1, Line-Out X1, MIC X1
Back Panel I/O
- USB 2.0 X2
- LAN port ( RJ-45) X1
- SPDIF-Out X1
- 1394 ( 6 Pin) X2
- Serial port X1
- VGA port X1
- PS/2 keyboard X1
- PS/2 mouse X1
- Headphone X1, Line-in X1, MIC-in X1
Dimension
212 mm (W) X 306mm(D) X 242mm( H)
Chassis material
All Aluminum Chassis
ADD DVI card
(Optional) included .
Chrontel CH7010 DVI transmitter with TV encoder
TV –out supporting up to 1024X768 graphics resolutions
S-video out X1, Composite X1, DVI port X1
Power Supply
220W with UL, TUV, CE requirement
PFC optional
email (omar@xcelonline.com)